| hapfo - Woodturning
Lathe ap-3000-S and accessories |
|
With Steel column 220 volts,
3 ph., 60 cycles, 2 HP 8 speeds, pole-changing motor,
hollow shaft Ø 16 mm distance betw. Centres 1.100
mm, height of centres 250 mm
|
|
| Extra charge for tool panel |
• |
Extra charge for spindle drive
infinitely, electronically variable
from 0 - 3500 rpm, motor 220 volts,3-ph.,2 HP(1,5 kW)
60 cycles
|
• |
Extra charge for motor brake
incl. brake switch and slip-off safety ring
|
• |
| Extra charge for left and right
run incl. slip-off safety device |
|
| Extra charge for turning device
outwards of headstock, with 3-fold bearing (hollow shaft
Ø 15 mm) |
• |
| Extra charge for left and right
run incl. slip-off safety device for turning device
outwards of headstock |
• |
| Slip-off safety device per accessory
part on/in spindle, required for motor brake, outwards
turning device and left/right run |
|
| Bed extension 300 mm (distance
betw. centres 1.400 mm) |
• |
| Live centre MK 2 |
|
| Pressure ring for live centre
MK 2 |
|
| Six-pronged dog Ø 20
mm MK 3 |
|
| Six-pronged dog Ø 30
mm MK 3 |
|
| Special dog Ø 14 mm MK
3 |
|
| Heureka - chuck |
|
| Socket chuck Ø 40 mm |
|
| Socket chuck Ø 50 mm |
|
| Socket chuck Ø 60 mm |
|
| Socket chuck Ø 70 mm |
|
| Socket chuck Ø 80 mm |
|
| Socket chuck Ø 90 mm |
|
| Face plate Ø 150 mm |
|
| Gear rim drill chuck MK 2 |
|
| Three-jaw chuck Ø 80
mm |
|
| Three-jaw chuck Ø 125
mm |
|
| Four-jaw chuck Ø 80 mm |
|
| Four-jaw chuck Ø 125
mm |
|
| Back rest for hand rest holder |
|
| Back rest (rollers separately
adjustable) |
|
| Self centering back rest |
|
| Grinding table, adjustable to
45 ° |
|
| Grinding table for hand rest
holder |
|
| Grinding disc Ø 280 mm |
|
| Compound slide rest (New - also
suited for pattern shops) |
|
| Hand rest 180 mm wide |
|
| Hand rest 275 mm wide |
|
| Hand rest 425 mm wide |
|
| Self-centering deep hole boring
device ZT-200 |
|
| Copying Attachment KA - 90 |
|
| Original-sample tracing device
for KA-90 |
|
| Copying cross member for KA-90
(for plates) |
|
| Copying lathe tool polished,
for KA-90 longitudinal |
|
| Copying lathe tool polished,
for KA-90 transversal |
|
| Safety and suction hood for
KA-90 transversal |
|
| Centering device |
|
| Template made of aluminium 60
x 1.000 mm |
|
| Template made of aluminium 80
x 1.000 mm |
|
| Template made of aluminium 100
x 1.000 mm |
|
| Ball turning device incl. HSS
lathe tool |
|
| Ball driving dog MK 3 |
|
| Ball driving piece for live
centre MK 2 |
|
The
hapfo ap-3000-S is a highly efficient lathe designed mainly
for professional operation. It is a heavy duty wood-turning
lathe that combines performance with safety and German precision.
The high quality milled and polished lathe bed, as well as
the tailstock and headrest, are manufactured from maintenance
free gray cast iron. This construction allows for vibration
free wood-turning. The spindle speed is adjustable via a
three-step
pulley and an adjustable belt drive. The easily attachable
KA-90 copying device allows for meticulously accurate length
and cross copying. 
