Hapfo - Wood
- Copying Lathe ap-5 0 0 0-CNC motor 220 volts,
3-phase,
60 cycles
|
|
2-Axle CNC-machine with servo-motor-control
for turning round profiles
incl. PC-Hardware, incl. 1 HSS-lathe tool.Ready
for operation with Software hapfo CNC4.9 and software
program for program conversion from another programming-software
e.g. AUTO-CAD, DIN-ISO distance between centres 1.590
mm, copying length 1.480 mm, incl. heavy tailstock
MK 3
Programming directly at the machine or external PC
(e.g. in office)
Advantage: program modifications can be made directly
at the machine and must not be done over external
PC
Storage: (8 GB) 1 Million programs |
|
| Extra charge for automatic swivel-copying-lathe
tool (pneumatic), PC-controlled, Max. copying Ø
= 210 mm Thus 90° recesses (resp."relief-turning")
are possible during copying operation. |
|
| Extra charge for EOM Mega-Cad,
COM-Software, developed especially for turning |
|
Extra charge for 3-Axle CNC-machine
with servo-motor-control
for additional production of twisted work pieces (e.g.
rope twists and most spirals as well as milling of edged
profiles with any indexing and pitches.
incl. router (2000 wattage),220 volts, 1-phase, however
without profile cutters, collet chucks and cutter adapter.
|
• |
| Holder for router (2000 Watt)
usable from the front e.g. for engraving |
|
| Profile cutter for router (complete
set no. 1-6), incl. 2 collet chucks Ø ½
and ¼ inch and cutter adapter M 12 x 1 |
|
Extra charge for 3-Axle CNC-machine
with servo-motor-control
for additional production of twisted work pieces (e.g.
rope twists and most spirals). As well as milling of
edged profiles with any indexing and pitches.
incl. Special Set-up for grooving, 16 mm collet (without
profile cutters)
|
• |
| Profile cutter knife No. 1 (shaft
16 mm) |
|
| Profile cutter knife No. 2 (shaft
16 mm) |
|
| Profile cutter knife No. 3 (shaft
16 mm) |
|
| Profile cutter knife No. 4 (shaft
16 mm) |
|
| Profile cutter knife No. 5 (shaft
16 mm) |
|
| Profile cutter knife No. 6 (shaft
16 mm) |
|
| Profile cutter knife No. 7 (shaft
16 mm) |
|
Extra charge for LASER-Scanning
for outline-scanning and automatic setting of CNC-program
|
• |
| Accessories: |
|
| Four jaw chuck follower rest
30 - 60 mm, infinitely variable |
|
| Four-jaw chuck follower rest
50 - 80 mm, infinitely variable |
• |
| Four-jaw chuck follower rest
60 -100 mm, infinitely variable (max 1250 rpm) |
• |
| Four-jaw chuck follower rest
100 - 135 mm infinitely variable (max. 1000 rpm) |
• |
| Ring-follower rest (15-70 mm)
with HSS-steel for rough cutting (without inset disc) |
• |
| 1 Set inset discs for ring follower
rest Ø 20 / 30 / 40 / 50 / 60 / 70 mm |
|
| 1 Set inset discs for ring follower
rest Ø 15 / 25 / 35 / 45 / 55 / 65 mm |
|
| Work piece feeding device (mounted
on ring follower rest) |
|
| Ring-follower rest (80 - 120
mm) with HSS-steel for rough cutting (without inset
disc) |
• |
| 1 Set inset discs for ring follower
rest Ø 80 / 85 / 90 / 95 / 100 mm |
|
| Special-live centre MK 3 with
pressure ring |
|
| Six-pronged dog MK 3, Ø
20 mm lengthened |
|
| Six-pronged dog MK 3, Ø
30 mm lengthened |
|
| Six-pronged dog MK 3, Ø
40 mm lengthened |
|
| Copying lathe tool HSS |
|
| Super-copying lathe tool for
soft and hard wood (life 10) |
|
| Three-jaw chuck Ø 125
mm |
|
| Four-jaw chuck Ø 125
mm |
|
Special-lathe tool incl. steel
holder and profile sharpening machine with diamond grinding
stone (motor 220 volts, 3-phase, 60 cycles)
|
|
| Special-lathe tool (V-Steel) |
|
| Tantum-lathe tool (V-Steel) |
|
| Sharpening machine for copying
lathe tools (motor 220 volts, 60 cycles) |
|
| Replacement grinding stone for
sharpening machine |
|
| Connection unit for suction
tube for ring-follower rest (15 - 70 mm) |
|
| Connection unit for suction
tube for ring-follower rest (80 - 120 mm) |
|
| Special-Steel holder incl. HSS-lathe
tool transverse, for cross-copying |
|
A
rugged cast iron CNC copy lathe from Germany, the Hapfo
ap-5000-CNC expands the capabilities of the hapfo ap-5000-Hydro
by giving the woodturner the ability to turn and rope items
after
they have been scanned into the computer. 
