hapfo ap-5000-Hydro

The ap-5000-Hydro is a German cast iron lathe that is so accurate that it will turn items as small as lace bobbins to as large as 11" diameter columns to a professional standard with crisp detail to match.


Its greatest benefit is that it can be converted in 7-8 minutes to make superb barley twists which are now so popular. Profits can be made due to the lack of competition. Fluting can also be achieved quickly and easily…it will almost certainly be the best investment you will ever make!


Please note that the KFE twist attachment when fitted to the AP-5000-H has a lead range of 60mm-700mm. This lathe is ideal for both the small general woodturner operating his business at his home or a big company wanting specialist turnings for furniture components, etc.

hapfo - Hydraulic Wood Copying Lathe ap-5 0 0 0-Hydro
motor 220 volts, 3-phase, 60 cycles
  
Distance between centres 1600mm, copying length 1500 mm,
Spindle motor 2,5 HP Hydraulic tracing device (stroke 150 mm)
Motorized feed by means of infinitely variable electronic direct-current motor
(0,37 kW) inclusive return speed of carriage incl. 1 HSS - steel, however without follower rests

Other technical data and accessories - see AP-5000-M

 
Extra charge for no-wear, hardened linear slide bar for copy slide rest and copying saddle, incl. heavy tailstock MK 3  
Extra charge for second hydraulic copy slide rest (double copying lathe)
incl. heavy tailstock MK3, incl. 1 HSS-steel. Distance between centres 1.400 mm, copying length 1.390 mm
 • 
Special-Live centre MK 3, with pressure ring-only for linear slide bar or double- copying lathe  
Six-pronged dog MK 3, Ø 20 mm - X-large-only for double-carriage copying lathe  
Six-pronged dog MK 3, Ø 30 mm - X-large-only for double-carriage copying lathe  
Extra charge for precision setting of depth (for each carriage) • 
Extra charge for electronically smooth starting device  
Extra charge for spindle drive infinitely electronically variable
from 0 -3500 rpm, motor: 220 volts (3 phase) - 2 HP (1,5 kW) - 60 cycles
 • 
Extra charge for motor brake incl. brake switch and slip-off safety ring • 
Extra charge for left and right run incl. slip-off safety device • 
Slip-off safety device per accessory part on/in spindle, required for motor brake and left and right run
  
Extra charge for motorized feed by means of infinitely variable electronic direct-current motor incl. return speed of carriage (0,37 kW) • 
Four-jaw chuck follower rest, 30 - 60 mm infinitely variable • 
Four-jaw chuck follower rest, 50 - 80 mm infinitely variable • 
Four-jaw chuck follower rest, 60 -100 mm infinitely variable (max. 1250 rpm) • 
Four-jaw chuck follower rest, 100 - 135 mm infinitely variable (max. 1000 rpm) • 
Ring-follower rest (15-70 mm) with HSS-steel for rough cutting (without inset disc) • 
1 Set inset discs for ring follower rest Ø 20 / 30 / 40 / 50 / 60 / 70 mm  
1 Set inset discs for ring follower rest Ø 15 / 25 / 35 / 45 / 55 / 65 mm  
Work piece feeding device (mounted on ring-follower rest)  
Ring-follower rest (80-120 mm) with HSS-steel for rough cutting (without inset disc) • 
1 Set inset discs for ring follower rest, Ø 80 / 85 / 90 / 95 / 100 mm  
Original-sample tracing device (tracing up to 1050 mm) = standard equipment on Hydro - version  
Special-live centre MK 2 with pressure ring  
Six-pronged dog MK 3 Ø 20 mm lengthened  
Six-pronged dog MK 3 Ø 30 mm lengthened  
Six-pronged dog MK 3 Ø 40 mm lengthened  
Hand rest for subsequent cutting by hand (on support)  
Hand rest for subsequent cutting by hand (on support) for Hydro  
Copying lathe tool HSS  
Super-copying lathe tool for soft and hard wood (lifex 10)  
Hand rest base with hand rest 275 mm (for turning by hand)  
Hand rest 180 mm  
Hand rest 425 mm  
Template made of aluminium 60 x 1000 mm  
Template made of aluminium 80 x 1000 mm  
Template made of aluminium 100 x 1000 mm  
Template made of aluminium 60 x 1500 mm  
Template made of aluminium 80 x 1500 mm  
Template made of aluminium 100 x 1500 mm  
Centering device  
Socket chuck Ø 40 / 50 / 60 mm each  
Socket chuck Ø 70 / 80 mm each  
Screw chuck Ø 90 mm  
Face plate Ø 150 mm  
Gear rim drill chuck MK 2  
Three-jaw chuck Ø 125 mm  
Four-jaw chuck Ø 125 mm  
Compound slide rest (New - also suited for pattern shops)  
Cross-copying device incl. safety and suction hood  
Special-lathe tool incl. steel holder and profile sharpening machine with diamond grinding stone (motor 220 volts, 60 cycles)
  
Special-Lathe tool (V-Steel)  
Tantum-Lathe tool (V-Steel)  
Sharpening machine for copying lathe tools (motor 220 volts, 60 cycles)  
Replacement grinding stone for sharpening machine  
Subsequent cutting device with 2 supports (without steel) • 
Steel for subsequent cutting device (for mortise) each  
Connection unit for suction tube for ring-follower rest (15 - 70 mm)  
Connection unit for suction tube for ring-follower rest (80 - 120 mm)  
Suction connecting piece for copying lathe tools (= standard equipment on Hydro version)  
Twist Attachment KFE - 5000 complete for ap5000 motorised and Hydro • 
Profile cutter knives, complete set of 6 pcs., incl. 2 collet chucks and cutter adapter  

Technical alterations reserved All accessory parts marked with • have to be ordered with base machine For fitting on a later date, there is no guarantee for function.