hapfo –
Hydraulic Wood Copying Lathe ap-5 0 0 0-Hydro
King Motor 220 volts, 3-phase, 60 cycles
|
|
Distance between centres 1.600
mm, copying length 1.500 mm
Hydraulic tracing device (stroke 150 mm)
Motorized feed by means of infinitely variable electronic
direct-current motor
(0,37 kW) incl. quick return of carriage, tailstock
MK 2
incl. 1 HSS - steel, however without follower rests
|
|
Extra charge for distance between
centres 2.500 mm, copying length 2.400 mm, inclusive
second lathe bed with third column as well as second
tool panel, incl. template bar holder on 2nd bed with
throughway template bar as well as two cranks for fine
adjustment and two additional supporting legs to the
bed, incl. gear rack and aluminium strip on 2nd bed,
incl. heavy tailstock MK 3.
A max. work piece Ø of 170 mm is possible when
using the whole distance between centres of 2.500 mm.
(Total length of machine about 3.600 mm. Machine will
be supplied in one whole piece as it cannot be dismantled)
|
• |
Extra charge for spindle drive
infinitely electronically variable
From 0-3500 rpm, motor: 220 volts, (3 phase) –
2 HP (1,5 kW) – 60 cycles
|
• |
Extra charge for special setup
for grooving (KF-50)
incl. feed motor (0,75 kW) with separate ventilation
incl. KFE, however without ELU-router, without bracket,
incl. 16 mm collet.
Grooving length 2.400 mm
|
• |
| Profile cutter knive No. 1 for
KF-50 |
|
| Profile cutter knive No. 2 for
KF-50 |
|
| Profile cutter knive No. 3 for
KF-50 |
|
| Profile cutter knive No. 4 for
KF-50 |
|
| Profile cutter knive No. 5 for
KF-50 |
|
| Profile cutter knive No. 6 for
KF-50 |
|
| Profile cutter knive No. 7 for
KF-50 |
|
| Special-live centre MK 2 with
pressure ring |
|
| Special-live centre MK 3 with
pressure ring |
|
| Extra charge for precision setting
of depth |
• |
| Extra charge for left- and right
run incl. slip-off safety device |
• |
Slip-off safety slot per accessory
part on/in spindle) required for left- and right run
|
|
| Four-jaw chuck follower rest
30 - 60 mm infinitely variable |
• |
| Four-jaw chuck follower rest
50 - 80 mm infinitely variable |
• |
| Four-jaw chuck follower rest
60 - 100 mm infinitely variable (max 1250 rpm) |
• |
| Four-jaw chuck follower rest
100 - 135 mm infinitely variable (max 1000rpm) |
• |
| Ring-follower rest 15-70 mm
with HSS-steel for rough cutting (without inset discs) |
• |
| 1 Set inset discs for ring follower
rest Ø 20 / 30 / 40 / 50 / 60 / 70 mm |
|
| 1 Set inset discs for ring follower
rest Ø 15 / 25 / 35 / 45 / 55 / 65 mm |
|
| Work piece feeding device (mounted
on ring-follower rest) |
|
| Ring-follower rest 80 - 120
mm with HSS-steel for rough cutting (without inset discs) |
• |
| 1 Set inset discs for ring follower
rest Ø 80 / 85 / 90 / 95 / 100 mm |
|
| Six-pronged dog MK 3, Ø
20 mm lengthened |
|
| Six-pronged dog MK 3, Ø
30 mm lengthened |
|
| Six-pronged dog MK 3, Ø
40 mm lengthened |
|
| Hand rest for subsequent cutting
by hand (on support) for Hydro |
|
| Copying lathe tool HSS |
|
| Super-copying lathe tool for
soft and hard wood (lifex 10) |
|
| Hand rest base with hand rest
275 mm (for turning by hand) |
|
| Hand rest 180 mm |
|
| Hand rest 425 mm |
|
| Template made of aluminium 60
x 1000 mm |
|
| Template made of aluminium 80
x 1000 mm |
|
| Template made of aluminium 100
x 1000 mm |
|
| Template made of aluminium 60
x 1500 mm |
|
| Template made of aluminium 80
x 1500 mm |
|
| Template made of aluminium 100
x 1500 mm |
|
| Centering device |
|
| Socket chuck Ø 40 / 50
/ 60 mm each |
|
| Socket chuck Ø 70 / 80
mm each |
|
| Screw chuck Ø 90 mm |
|
| Face plate Ø 150 mm |
|
| Gear rim drill chuck MK 2 |
|
| Three-jaw chuck Ø 125
mm |
|
| Four-jaw chuck Ø 125
mm |
|
| Compound slide rest ( NEW -
also suited for pattern shops) |
|
| Cross-copying device complete,
incl. safety and suction hood |
|
Special-lathe tool incl. steel
holder and profile sharpening machine
with diamond grinding stone (motor 220 volts, 60 cycles)
|
|
| Special-Lathe tool (V-steel) |
|
| Tantum-Lathe tool (V-steel) |
|
| Sharpening machine for copying
lathe tools, (motor 220 volts, 60 cycles) |
|
| Replacement grinding stone for
sharpening machine |
|
| Connection unit for suction
tube for ring-follower rest 15 - 70 mm |
|
| Connection unit for suction
tube for ring-follower rest 80 - 120 mm |
|
The
Hapfo ap-5000-Hydro King expands the capabilities of the
hapfo
ap-5000-Hydro by giving the woodturner the ability to turn
and rope items up to 96" such as bed posts and columns.
The King's innovative hydraulic tracing device has a six
inch
range that allows the woodturner to produce exquisite profile
pitches and it is capable of copying from a sample as well
as a template. The KFE Twist Attachment, can be fitted on
the ap-5000-Hydro King to create endless turning possibilities
such as longitudinal groovings, rope twists, barley twists,
spirals, and hollow core turnings. 
