hapfo ap-6000-ES

The heavy duty version of the ap-5000, the ap-6000-ES is designed for the woodturner who needs to produce large turnings of up to 400mm in diameter (can be done with the long bedded version up to 3.8 meters in length). The twin copy arms allow deep cutting which is especially important when using the big 60-100 m steady. The ap-6000-ES German cast iron lathe is so accurate that precision work of only a few millimeters in diameter can also be produced proving it to be one of the most versatile heavy duty copy lathes manufactured by any company worldwide. The machine has been designed to allow the operator to sand the workpiece without obstruction so that the production rate can exceed that of competitor's automatic lathes where sanding has to be done afterwards.The KFE twist and flute conversion dramatically extends the scope of the AP-5000 lathe and allows the production of all types of twisted and fluted work including big columns. The special design of the KFE enables the woodturner to produce barley twists, fluting of shaped and curved workpieces and tapered rope. The workpiece drive is linked to the motorized feed gearbox via the lead control, indexing system and left and right hand gearbox.The HSS cutters give a superb finish and with most woods minimal sanding would be required.

Hapfo - WOOD TURNING / COPYING LATHE
Wood turning lathe incl. hand rest holder and hand rest 275 mm Distance between centres 1.500 mm, motor 220 volts, 3-ph., 60 cycles
Wood copying lathe with motorized feed (acc. leaflet), without follower rests, incl. 1 HSS-steel, incl. return speed of carriage distance between centers and copying length 1.500 mm motor 220 volts, 3-ph., 60 cycles
Extra charge for distance between centers 3.800 mm (with second lathe bed and 2 add. cast iron legs) copying length 1.500 mm, (ES-design)	•
Extra charge for distance between centers and copying length 3.800 mm	•
Extra charge for distance between centers and copying length 1.850 mm	•
Extra charge for electronically smooth starting device
Extra charge for speeds 270 to 3500 rpm infinitely variable by means of pole-changing motor	•
Extra charge for motor brake incl. brake switch and slip-off safety ring	•
Extra charge for left and right run incl. slip-off safety ring	•
Slip-off safety device per accessory part (on/in spindle) required for motor brake and left/right run
Four-jaw chuck follower rest, 30 - 60 mm infinitely variable	•
Four-jaw chuck follower rest, 50 - 80 mm infinitely variable	•
Four-jaw chuck follower rest, 60 - 100 mm inf. variable (max 1250 rpm)	•
Four jaw chuck follower rest, 100–150 mm inf. variable (max.1000 rpm)	•
Ring-follower rest (15-70 mm) with suction connecting piece and HSS-steel for rough cutting (without inset discs)	•
1 Set inset discs for ring-follower rest Ø 20-30-40-50-60-70 mm
1 Set inset discs for ring-follower rest Ø 15-25-35-45-55-65 mm
Work piece feeding device (mounted on ring-follower rest)
Special live centre MK 3 with pressure ring (required for ring-follower rest)
Live centre MK 3
Pressure ring for live centre MK 3
Six-pronged dog Ø 20 mm MK 4, lengthened
Six-pronged dog Ø 30 mm MK 4, short/lengthened
Six-pronged dog Ø 40 mm MK 4, short/lengthened
Six-pronged dog Ø 60 mm MK 4, short/lengthened
Hand rest for subsequent cutting by hand (on support)
Additional support for thin originals (when using sample tracing device) each
Copying lathe tool HSS
Super-copying lathe tool for soft and hard wood (lifex 10)
Hand rest base with hand rest 275 mm (for hand turning)
Hand rest 180 mm
Hand rest 425 mm
Cross-copying device incl. safety and suction hood
Replacement copying lathe tool HSS, transversal
Template made of aluminium 60 x 1000 mm
Template made of aluminium 80 x 1000 mm
Template made of aluminium 100 x 1000 mm
Template made of aluminium 60 x 1500 mm
Template made of aluminium 80 x 1500 mm
Template made of aluminium 100 x 1500 mm
Centering device
Socket chuck Ø 40 / 50 / 60 mm each
Socket chuck Ø 70 / 80 mm each
Screw chuck Ø 90 mm
Face plate Ø 200 mm
Face plate Ø 300 mm
Face plate Ø 400 mm
Gear rim drill chuck MK 3
Three-jaw chuck Ø 125 mm
Four-jaw chuck Ø 125 mm
Four-jaw chuck Ø 200 mm
Compound slide rest (New - also suited for pattern shops)
Clamping device for curved work pieces
Special-Lathe tool incl. steel holder and profile sharpening machine with diamond grinding stone (motor 220 volts, 60 cycles)
Special-Lathe tool (V-Steel)
Tantum-Lathe tool (V-Steel)
Sharpening machine for Copying lathe tools (motor 220 volts, 60 cycles)
Replacement grinding stone for sharpening machine
Subsequent cutting device with 2 supports (without steel)	•
Steel for subsequent cutting device (for mortise) each
Suction connecting piece for copying lathe tools
Twist Attachment KFE for cutting length 1.300 mm (standard)	•
Twist Attachment KFE for cutting length 2.500 mm	•
Set Profile cutter knives, (No.1-6) incl. 2 collet chucks and cutter adapter

Technical alterations reserved All accessory parts marked with • have to be ordered with base machine For fitting on a later date, there is no guarantee for function.