hapfo ap-7000-CNC

A rugged cast iron CNC copy lathe from Germany, the ap-7000-CNC from Hapfo has a proven track record. It provides copy turning up to 300mm diameter, and is the perfect machine for the larger kitchen and furniture manufacturer. With a bed length of 1800mm or 2500mm, the Hapfo ap-7000-CNC is one of the larger models of Hapfo lathes.

The control panel uses PC-based MegaCAD software which, together with the easy to use control unit makes for efficient operation, and you can change the program in seconds. With the ap- 7000 CNC and laser scanning, you do not need copy templates any more. The laser scanning system "reads" the piece to be copied, and inputs the work piece design into the MegaCAD program. If you wish, you can then make modifications, or reproduce it exactly as the work piece.

The ap-7000-CNC has a unique swiveling tool holder that can give perfect 90% angles in the work. Vertical leading and decreasing outlines are possible and you can have constant feeding at any lead (decrease). Using the front mounted milling unit and profile cutter, twists and flutes are so easy. The ap-7000-CNC is ideally suited for the production of round profiles, such as banisters, table-legs, chair-legs, lamp standards. It also handles twisted profiles and longitudinal groovings with ease, and happily tackles the milling of edged profiles from 1 to 24 piece surfaces. There is a choice of ring or four-jaw steadies up to 150 mm.

Hapfo - Wood - Copying Lathe ap-7 0 0 0-CNC motor 220 volts, 3-phase, 60 cycles
2-Axis CNC-machine with servo-motor-control for turning round profiles incl. PC-Hardware and CAD-Software MegaCAD, incl. 1 HSS-lathe tool distance between centres 1.800 mm, copying length 1.700 mm max. copying Ø = 420 mm incl. hardened, no-wear linear slide bars for X- and Y- axle as well as self-acting central lubrication of copy slide rest, copying saddle and saddle lead screw. Spindle-motor 4 kW Programming directly at the machine or external PC (e.g. in office) Advantage: program modifications can be made directly at the machine and must not be done over external PC Storage: (8 GB) 1 Million programs
2-Axis CNC-machine- workmanship as above mentioned however with distance between centres and copying length 2.700 mm
Extra charge spindle speed 270–3500 rpm. infinitely variable by pole-changing motor	•
3-axis CNC machine (Main spindle drive) with servo-motor-control for production of round profiles and twisted work pieces (e.g. rope twists and most spirals as well as milling of edged profiles with any indexing and pitches.) incl. Special Set-up for grooving, 16 mm collet (without profile cutters) incl. PC-Hardware and CAD-Software MegaCAD, incl. 1 HSS-lathe tool. Distance between centres 1.800 mm, Copying length 1.700 mm, max.copy-Ø=420 mm Incl. hardened, no-wear linear slide bars for X- and Y- axle as well as self-acting central lubrication of copy slide rest, copying saddle and saddle lead screw. Main spindle drive 5,0 kW (S6) Speeds 0 - 4.000 rpm. The main spindle drive enables infinitely variable speed control – with self-acting speed programming. It enables to program the speed at any position, or to adapt cutting speed automatically. The main spindle drive includes smooth starting device and motor brake. Revolution indication over monitor, speed can be changed during operation on keyboard Programming directly at the machine or external PC (e.g. in office) Advantage: program modifications can be made directly at the machine and must not be done over external PC Storage: (8 GB) 1 Million programs	•
3-axle CNC machine – workmanship as above mentioned however distance between centres and copying length 2.700 mm
Profile cutter knife No. 1
Profile cutter knife No. 2
Profile cutter knife No. 3
Profile cutter knife No. 4
Profile cutter knife No. 5
Profile cutter knife No. 6
Profile cutter knife No. 7
Extra charge for self-acting swivel copying-lathe tool (pneumatic) PC-controlled. Thus 90° recesses (resp. "relief-turning") are possible during copying operation	•
Extra charge for Special Milling Aggregate (Motor 4 HP, 6000 rpm, self-acting motor brake) without profile cutters, (only possible in connection with 3-axle CNC) For additional production of twisted work pieces (e.g. rope twists and most spirals as well as milling of edged profiles with any indexing and pitches.) Usable only for operation from the front (=turning and milling in one working operation) for max. work piece Ø 260 mm.	•
H M Profile cutter Ø 200 mm, carbide tipped, 12 edges, Ø of bore 30 mm usable for grooves as well as for edged profiles
Extra charge for saw blade-milling aggregate (motor 8 HP, speed 100-5.000 rpm, infinitely variable, automatic motor brake) incl. copying saw blade (carbide tipped) Ø 350 mm, (for square timbers of max. 250x250 mm) usable instead of copying lathe tool (resp. self-acting swivel copying-lathe tool has to be removed)	•
Copying lathe saw-blade Ø 350 mm
Extra charge for LASER-Scanning for outline-scanning and automatic setting of CNC-program	•
Accessories:
Four jaw chuck follower rest 30 - 60 mm, infinitely variable	•
Four-jaw chuck follower rest 50 - 80 mm, infinitely variable	•
Four-jaw chuck follower rest 60 -100 mm, infinitely variable (max. 1250 rpm)	•
Four-jaw chuck follower rest 100 -150 mm, infinitely variable (max. 1000 rpm)	•
Ring-follower rest with HSS-steel for rough cutting and suction connecting piece (without inset discs)	•
1 Set inset-disc for ring follower rest Ø 20-30-40-50-60-70 mm
1 Set inset disc for ring follower rest Ø 15-25-35-45-55-65 mm
Work piece feeding device (mounted on ring-follower rest)
Special-live centre MK 3 with pressure ring (required for ring-follower rest)
Live centre MK 3
Pressure ring for live centre MK 3
Six-pronged dog MK 4, Ø 20 mm lengthened
Six-pronged dog MK 4, Ø 30 mm lengthened
Six-pronged dog MK 4, Ø 40 mm lengthened
Six-pronged dog MK 4, Ø 60 mm, lengthened
Six-pronged dog MK 4, Ø 60 mm, short version
Copying lathe tool HSS
Super-copying lathe tool for soft and hard wood (lifex 10)
Three-jaw chuck Ø 125 mm
Four-jaw chuck Ø 125 mm
Special-lathe tool incl. steel holder and profile sharpening machine with diamond grinding stone (motor 220 volts, 60 cycles)
Special-lathe tool (V-Steel)
Tantum-lathe tool (V-Steel)
Sharpening machine for copying lathe tools (motor 220 volts, 3-phase, 60 cycles)
Replacement grinding stone for sharpening machine
Special tool holder incl. HSS lathe tool (for transverse turning)

Technical alterations reserved All accessory parts marked with • have to be ordered with base machine For fitting on a later date, there is no guarantee for function.