hapfo ap-7000-H

The Hapfo ap-7000-H is a heavy duty German cast iron German lathe built to turn large items accurately and quickly. The machine's design allows the operator to turn over different jobs quickly. Quick production rates are possible due to the fact that the sanding is done while the workpiece is turning. The ap-7000-H has a powerful hydraulic cutting action (the 1500 mm version has a hydraulic feed). most impressive features is that the bed length can be increased to 3800 mm. This allows the turner to produce large columns up to a diameter of 320 mm. This version of the lathe uses a powerful electric feed. The 3HP spindle motor has an infinitely variable speed range between 375-2700 rpm so that the correct speed may be selected for the appropriate size of timber being used. The control panel for the AP 7000 is a separate unit. This enables the panel to move freely and makes it convenient and safe for the operator. Many options are available including a 5 HP feed motor for heavy work, a second hydraulic cutting unit (copy length reduced to 1100-3650mm respectively) and a hydraulic quick action tailstock with a feeding device.

 

Hapfo - Hydraulic Wood Copying Lathe ap-7 0 0 0-H  
Standard design: distance between centers and copying length 1.500 mm,
hydraulic profile tracing, - motorized feed by means of infinitely variable electronic direct-current motor (0,55 kW) incl. return speed of carriage,
spindle speed from 375 to 2700 rpm., template adjustment from the front,
control panel fitted onto copying carriage (following)
without follower rests, incl. 1 HSS-steel
motor 220 volts, 3-ph., 60 cycles
  
Extra charge distance between centers and copying length 1.850 mm • 
Extra charge for precision setting of depth • 
Extra charge for electronically smooth starting device  
Extra charge for speeds 270 to 3500 rpm. infinitely variable by means of pole-changing motor • 
Extra charge for motor brake incl. brake switch and slip-off safety ring • 
Slip-off safety device per accessory part on/in spindle, required for motor brake  
Four-jaw chuck follower rest 30 - 60 mm infinitely variable • 
Four-jaw chuck follower rest 50 - 80 mm infinitely variable • 
Four-jaw chuck follower rest 60 - 100 mm infinitely variable (max. 1250 rpm) • 
Four-jaw chuck follower rest 100 - 150 mm infinitely variable (max. 1000 rpm) • 
Ring-follower rest(15-70 mm)with HSS-steel and suction connecting piece (without inset discs)
• 
1 Set inset discs for ring-follower rest Ø 20-30-40-50-60-70 mm  
1 Set inset discs for ring-follower rest Ø 15-25-35-45-55-65 mm  
Work piece feeding device (mounted on ring-follower rest)  
Special-live centre MK 3 with pressure ring (required for ring-follower rest)  
Live centre MK 3  
Pressure ring for live centre MK 3  
Six-pronged dog Ø 20 mm, MK 4 lengthened  
Six-pronged dog Ø 30 mm, MK 4 lengthened  
Six-pronged dog Ø 40 mm, MK 4 lengthened  
Six-pronged dog Ø 60 mm, MK 4 lengthened  
Six-pronged dog Ø 60 mm, MK 4 short  
Hand rest for subsequent cutting by hand (on support)  
Copying lathe tool HSS  
Super-copying lathe tool for soft and hard wood (lifex 10)  
Hand rest base with hand rest 275 mm (for turning by hand)  
Hand rest 180 mm  
Hand rest 425 mm  
Cross-copying device KA-90 inclusive safety and suction hood  
Replacement copying lathe tool HSS transversal  
Template made of aluminium 60 x 1000 mm  
Template made of aluminium 80 x 1000 mm  
Template made of aluminium 100 x 1000 mm  
Template made of aluminium 60 x 1500 mm  
Template made of aluminium 80 x 1500 mm  
Template made of aluminium 100 x 1500 mm  
Centering device  
Face-plate Ø 200 mm  
Face-plate Ø 300 mm  
Face-plate Ø 400 mm  
Gear rim drill chuck MK 3  
Three-jaw chuck Ø 125 mm  
Four-jaw chuck Ø 125 mm  
Four-jaw chuck Ø 200 mm  
Clamping device for curved work pieces  
Subsequent cutting device with 2 supports (without steel) • 
Steel for subsequent cutting device (for mortise) each  
Special-lathe tool incl. steel holder and profile sharpening machine with diamond grinding stone (motor 220 volts, 3-phase, 60 cycles)
  
Special-lathe tool (V-Stahl)  
Tantum-lathe tool (V-Stahl) especially for hardwood (= more lifex)  
Sharpening machine for copying lathe tools (motor 220 volts, 3-ph., 60 cycles)  
Replacement grinding stone for sharpening machine  
Twist Attachment KFE – 7000 complete, grooving length 1.300 mm • 
Profile cutter knives, complete set of 6 pcs., incl. 2 collet chucks and cutter adapter  

Technical alterations reserved All accessory parts marked with • have to be ordered with base machine For fitting on a later date, there is no guarantee for function.