Stegherr BOF Arc Cutter


  • For the production of radius mouldings up to 4” width with a minimum radius of 6”
  • Capable of straight line profiling
  • Strategically positioned rollers for continuous positive pressure, ensures uniform flow of the work piece eliminating costly post machining sanding touchups
  • Dual dust collection ports above & below the cutter head for optimum efficiency

 

Standard Features:
Heavy duty steel construction 350kgs(770 lbs)
Equipped for horizontal profiling & grooving of straight, arched & elliptical mouldings
4kw(5.5hp,3ph,220v,60hz) main motor
0.37kw(0.5hp,3ph,220v,60hz) independent variable speed 1.4m(5.5') to 8m(32') per minute feed motor in forward & reverse
Flexible mount, 7 feed roll guide system for positive feed pressure across entire cutting path
31.75mm(1.25") diameter spindle rotating @ 9,000rpm's
125mm (5") to 160mm(6.25") tool diameter capacity
 100mm(4") wide by 80mm(3.25") high maximum part capacity
Corrugated 4 knife tool head cutter 100mm(4") by 100mm(4") with a 31.75mm(1.25") bore
Dual dust extraction port of 140mm(5.5") diameter on top & 100mm(4") diameter on side
Conforms to C.E.safety standards

Available Options:

Fence for straight runs
High speed feed system of 2.4m(8') to 18m(60') per minute