US Concepts CSR-700 Automatic Stair Trencher - VIDEO

Our heavy duty fully automatic
CSR-700 Stair Trencher for box stair construction is designed for easy setup. The operator using a touch screen data entry keypad simply inputs the rise and run dimensions with the number of steps, loads the boards onto the left side feed table and presses the cycle start button. Two high-speed router motors simultaneously machine both left and right hand stringers and when complete the cycle stops

Standard Features:

Heavy duty fabricated frame and cast iron tables 3,720 lbs

Floor space required (88” x 55”)

Maximum width of board allowed 300mm(12”)

Maximum combined thickness of boards allowed 100mm(4”)

Rise x Run range 5" x 7" to 9" x 14"

2 programmable inverter driven router spindles with overload protection 3hp, 3ph, 220v, 60hz

Dust extraction outlet 8" diameter

Minimum air pressure required 90psi

Interlocked safety enclosure with emergency stops

Standard tool kit

1 set TCT cutters 19mm(0.75”)

2 nosing plates (to customers specification)

3 guide rollers 16mm(0.62”),19mm(0.75”) & 22mm(0.85”)

Independent control box with PLC programming controller

Comprehensive instruction manual, complete with pneumatic and electrical diagrams

Meets CE safety regulations