| Standard
Features: |
| Heavy
duty steel construction 350kgs (770lbs) |
| Machining of 90 degree cross-joints on window &
door grills & many types of decorative notching in furniture & dentil
mouldings |
| 2
each 1.1kw (1.5hp,3ph,220v,60hz) motors |
| 3 each spindles with diameters of 22mm (7/8") rotating
@ 7,200rpm's with hydro-pneumatic controlled feed speeds |
| 1,000mm (39") fence right of cutter head |
| Minimum to maximum
part capacity of 8mm (0.31") by 6mm (0.24") to 56mm (2.2") by 80mm
(3.15") |
| 6
bar (85 psi) pneumatic part clamping device |
| 1 set of insert carbide tooling either 4.2mm (0.16")
to 7.5mm (0.3") or 7.5mm (0.3) to 14.5mm (0.55") & 1 groove cutter |
| Dust extraction
port of 150mm (6.0") |
| Conforms
to C.E. Safety standards |
Available
Options: |
| Complete
digital fence |
| Front
dado station ; option must be installed at time of production as retrofitting
is not possible after construction, the unit is equipped with a 1.1kw (1.5hp,3ph,220v,60hz)
motor & complete dado head |
| Coping station; available with front
dado station & must be installed at time of production, retrofitting is not
possible after the units construction, coping station comes with coping head to
your specification |
| 2
quick adjust preset stops for standard top & bottom milling units |
| Additional carbide
insert tooling set; either 4.2mm (0.16") to 7.5mm (0.3") or 7.5mm (0.3)
to 14.5mm (0.55") |
| Additional
dado tool set |
| Additional
coping tool set |
| Replacement
insert carbide knives; either 4.2mm (0.16") to 7.5mm (0.3") or 7.5mm
(0.3) to 14.5mm (0.55") |
| Variable speed control of tool travel |
| Special setting device
for carbide inserts |
| Foot
pedal control |
