| Standard
Features: |
| Heavy
duty steel construction 590kgs(1,300lbs) |
| Equipped to do beaded face frames & can be equipped
to do 90 degree cross-joints |
| 2 each 2.3kw(3.2hp,3ph,220v,60hz) motors |
| 3 each spindles with
diameters of 30mm(1.2") rotating @ 7,200rpm's with hydro-pneumatic controlled
feed speeds |
| Cutter
heads can be moved independently or as a group for optimum efficiency |
| 50mm(2") long
fence with 2 flip stops |
| Set
up for frame parts wider than 75mm(3.0") |
| 1 set of tooling for beaded face frame stock consisting
of; 1 each 40 tooth atb saw blade & 2 each 2 part cutters& includes carbide
insert knives adjustable from 17mm(0.67") to 32mm(1.25") |
| Dust extraction port
of 150mm(6.0") |
| Conforms
to C.E.safety standards |
| Available
Options: |
| Complete digital fence |
| Front dado
station ; option must be installed at time of production as retrofitting
is not possible after construction, the unit is equipped with a 1.1kw (1.5hp,3ph,220v,
60hz) motor & complete dado head |
| Coping station; available with front
dado station & must be installed at time of production, retrofitting is not
possible after the units construction, coping station comes with coping head to
your specification |
| Fence
extension for 2,450mm(96")capability with support leg |
| Additional fence flip stops |
| Additional tooling set for beaded frames |
| Carbide insert tool
set for cross-joint milling; either 4mm(0.16") to 7.62mm(0.3") or 7.62mm(0.3)
to 13.97mm(0.55") |
| Replacement
insert knives |
| Quick
adjust preset stops for standard top & bottom milling units |
| Special setting device
for carbide inserts |
| Foot
pedal control |
