| Standard
Features: |
| Heavy
duty steel construction 455kgs (1,000 lbs) |
| For doing 90 degree cross-joints, half rounds to 1,850mm
(72") dia. 915mm (36") radius & diamond grills |
| 2 each 1.1kw (1.5hp,3ph,220v,60hz)
motors |
| 3
each spindles with diameters of 22mm (7/8") rotating @ 7,200rpm's with hydro-pneumatic
controlled feed speeds |
| 3
fences; 1 for doing half rounds from 150mm (6.0") to 1,830mm (72") dia.
75mm (3.0") to 915mm (36") radius , 1 fence for doing diagonal joints
of 90 to 30 degrees & 1 fence for straight lengths up to 1,525mm(60") |
| Maximum stock thickness
of 50mm (1.9") wide by 60mm (2.25") high |
| 6 bar (85psi) pneumatic part clamping device |
| 1 set of insert carbide
tooling either 4.2mm (0.16") to 7.5mm (0.3") or 7.5m m(0.3) to 14.5mm
(0.55") & 1 groove cutter |
| Dust extraction port of 150mm (6.0") |
| Conforms to C.E. Safety
standards |
Available
Options: |
| Fence extensions to
do 1/2 rounds of 1,830mm (72") to 3,050mm (120") dia. 915mm (36")
to 1,525mm (60") radius |
| Special attachment for doing sunburst hubs with radius
of 75mm (3.0") or greater |
| Special attachment for doing elliptical grills |
| Complete digital fence |
| Additional carbide
insert tooling set; either 4.2mm (0.16") to 7.5mm (0.3") or 7.5mm (0.3")
to 14.5mm (0.55") |
| Replacement
insert carbide knives for either 4.2mm (0.16") to 7.5mm (0.3") or 7.5mm
(0.3") to 14.5mm (0.55") |
| Special setting device for carbide inserts |
| Foot pedal control |
