| Standard Features: |
| Heavy duty fabricated frame
and cast iron tables 850kg(1,870lbs) |
| Floor space required 2250x1400mm(7.5’
x4.5’) |
| Maximum width of board allowed
300mm(12”) |
| Minimum width of board allowed
200mm(8”) |
| Maximum combined thickness of
boards allowed 100mm(4”) |
| 2 inverter driven router spindles
18,000 & 22,000 rpm’s |
| 2 direct drive motors with
dynamic braking 2.2kw(3hp,3ph,220v,60hz) |
| Diameter of extraction outlet
to each head 75mm(3”) |
| Minimum air pressure required
6 bar(90psi) |
| Compressed air consumption rate
142litre(5cfm) / min |
| 1 set HSS cutters 19mm (0.75”) |
| 2 nosing plates (to customer
specification) |
| 3 guide rollers 16mm(0.62”),19mm(0.75”)
& 22mm(0.85”) |
| Automatic cycle start of pitch
movement and clamping |
| Colette and nut type chuck |
| 2 adjustable roller support
stands |
| 1 grease gun |
| Standard tool kit |
| Comprehensive instruction manual,
complete with pneumatic and electrical diagrams |
| Meets CE safety regulations
|
The
ST 2000 is semi automatic machine capable of producing
both
open and closed plan stairs. The unit is equipped with
pneumatic pitch movement and clamping to the top and side
of the work
piece via pressure cylinders. The operator controls the
machining sequence of the heads via an easy to use push
button control panel. The ST 2000 has two direct drive
spindles with pneumatic plunging movement, quick adjusting
jig, and
combined brush guard and extraction hood on both spindles
for ease of operation and safety.
