Stegherr SV Glazing Bar Feeder -VIDEO


  • Mount on any conventional shaper
  • Produce quality finished SDL& TDL grill stock quickly
  • Strategically positioned rollers for continuous positive pressure, ensuring uniform flow of S4S stock; eliminating costly post machining sanding touchups
  • Capable of feeding short length stock greater than 10” after coping & cross -jointing
  • Variable feed speeds 10' to 57'/min. In forward & reverse
  • A safe & affordable option for small to medium shops that want to manage production of TDL & SDL grills without the need to tie up a moulder
Standard Features:
Heavy duty steel construction 100kgs (220lbs)
Fits all conventional shapers; it's overall dimensions are 790mm (31.5") wide by 40mm (15.8") deep by 585mm (23") high
16 each 90mm (3.5") powered feed rollers for uniform pressure against the cutter for an unsurpassed finish
0.25kw (0.33hp,3ph,220v,60hz) variable feed speeds of 3m (10') to 17.4m (57') / min
Maximum part capacity of 75mm (3.0") wide by 75mm (3.0") high
Minimum part capacity of 12.5mm (0.5") wide by 12.5mm (0.5") high by 250mm (10") long
Specialized safety dust hood for maximum tool diameter of 160mm (6.3 )
Conforms to C.E. Safety standards
SV Feed System for SDL & TDL Bars