| Standard Features:
|
| Heavy duty fabricated frame
415kgs(920lbs) |
| Floor space required 1300x1300mm(4.25x4.25) |
| Maximum wedge length 300mm(12”) |
| Minimum wedge length 100mm(4”) |
| Maximum wedge thickness 55mm(2.2”) |
| Minimum wedge thickness 10mm(.4”) |
| Maximum wedge width 65mm(2.5”) |
| Minimum wedge angle 1? |
| Saw motor with overload protection
1.5kw(2hp,220v,3ph,60hz) |
| Diameter of extraction outlet
at saw & on hood) 100mm(4”) |
| Minimum air pressure required
6bar(90psi) |
| Compressed air consumption rate
350litre(12cfm) / min |
| Air Filter regulator with ¼"
BSP connection |
| 1 48 tooth TCT saw blade
280mm(11”) diameter with a 24mm(1’) bore |
| 3 spanner wrenches 19mm(0.75”),17mm(0.67”)
and 13mm(0.5”) |
| 1 Allen key and 1 'T' Bar 10mm(0.4”) |
| Adjustable hopper feed |
| Fully automatic operation with
PLC Control with pneumatically operated clamps, pusher
and saw positioning |
| Electro Magnetic Sensor fitted
to saw and feed pusher cylinders |
| Hinged front access door with
inspection window with safety lock |
| Adjustable hopper feed |
| 1 Anti-friction pusher block |
| Comprehensive instruction manual,
complete with pneumatic and electrical diagrams |
| Meets CE safety regulations |
The
WG 3 is a high-speed wedge cutter for the production of
up to 720 wedges per hour. Through a modern PLC control,
electromagnetic sensors and hopper feed, the operator is
able to accomplish various other tasks while this machine
automatically produces wedges.
