| Standard Features:
|
| Heavy duty welded steel construction
never needs leveling ergonomically designed with a 15
degree inclination |
| The frame is capable of handling
either a 1,200mm(4') or 1,500mm(5') high clamp carrier
beam |
| The standard frame length is
2,500mm(8') pressing length with larger lengths available |
| Electric/ hydraulic 2.2kw (3hp,
220v, 3ph, 60hz) pump generating up to 3,500kgs (7,700lbs)
of uniform pressing force @ 0 to 120bar (1,740psi) |
| 2 zone hyd. Spool valve control
with 3 position index levers ( engage, neutral, disengage
) for horizontal & vertical pressing, with pressure
relief valve, regulator & gauge, large hydraulic
oil reservoir & emergency safety switch |
| Meets C.E. & VDE safety
standards |
| |
| |
| |
| |
| |
| |
| |
BHP 3500
Hydraulic Press
Availble Options |
| Available in other frame lengths
of 500mm ( 1.65' ) sections |
| Available in dual sided work
frames |
Clamp carrier beams;
move on precision bearings & each beam is equipped
with 1 each 100mm(4") support ledge & one
counter-balanced hydraulic pressing element with 100mm(4.0")
stroke & 3,500kgs(7,700lbs) @ 120bar(1740psi)
pressing force
A) cost of beam with 1,200mm(4')
press height capacity
B) cost of beam with 1,500mm(5')
press height capacity |
| Front pressing element; moves
on upper & lower bearing guide rails & is equipped
with four pneumatic pressing cylinders control &
2 pressing plates |
| Shut off valve |
| Pendulum pressing element for
conical work pieces |
| Additional hydraulic spool valve
control with 3 position index levers, pressure relief
valve & regulator gauge |
| Double action pressing cylinders |
| 150mm support plate in lieu
of standard |
| |
| |
| |
| |
| |
| |
| |
| |
| |
The
affordable heavy duty hydraulic block press for small to
medium manufacturers
